NIC201a - Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

• Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC211a - Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 3 modes Skin / Manual / Prewarm mode

• Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC202a - Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

• Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC212a - Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 3 modes Skin / Manual / Prewarm mode

• Fixed height warmer with attached baby cradle mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC203a - Infant Radiant Warmer with Detachable Baby Cradle with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

• Fixed height warmer with detachable baby cradle mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC213a - Infant Radiant Warmer with Detachable Baby Cradle and Drawers with Microprocessor based temperature controller with 3 modes Skin / Manual / Prewarm mode

• Fixed height warmer with detachable baby cradle mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC205 - Infant Radiant Warmer with Fixed Baby Cradle with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

• Fixed height warmer with attachable baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC207 - Infant Radiant Warmer with Fixed Baby Cradle with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode

• Fixed height warmer with attached baby cradle mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC206 - Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 3 modes Skin / Manual / Prewarm mode

• Fixed height warmer with attachable baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC208 - Infant Radiant Warmer with Fixed Baby Cradle with Microprocessor based temperature controller with 3 modes Skin / Manual / Prewarm mode

• Fixed height with attached baby cradle mounted on 4" (100mm) wheels, 2 with brake.
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy.
• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height : 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode). Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

NIC722 - Infant Radiant Warmer with Fixed Baby Cradle & Drawers with Microprocessor based temperature controller with 4 mode Skin / Air / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelf and 3 Drawer Storage Cabinet
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• 0.5” Bright 7 segment LED’s (3 nos.) for Air temp.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Air Over temperature: Temp > 39.0°C
  • Air Under temperature: Temp < 20.0°C
  • Air Positive band: Temp > Set Temp by 1.5°C
  • Air Negative Band: Temp > Set Temp by 3.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC723 - Infant Radiant Warmer with Fixed Baby Cradle & Drawers with Microprocessor based temperature controller with 3 mode Skin / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelf and 3 Drawer Storage Cabinet
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC732 - Infant Radiant Warmer with Fixed Baby Cradle with Microprocessor based temperature controller with 4 mode Skin / Air / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelves
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Air Mode: Room temp. 20.0°C to 39.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• 0.5” Bright 7 segment LED’s (3 nos.) for Air temp.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Air Over temperature: Temp > 39.0°C
  • Air Under temperature: Temp < 20.0°C
  • Air Positive band: Temp > Set Temp by 1.5°C
  • Air Negative Band: Temp > Set Temp by 3.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC733 - Infant Radiant Warmer with Fixed Baby Cradle with Microprocessor based temperature controller with 3 mode Skin / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelves
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC652 - Infant Radiant Warmer with Detachable Baby Cradle with Microprocessor based temperature controller with 4 mode Skin / Air / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelves
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Air Mode: Room temp. 20.0°C to 39.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• 0.5” Bright 7 segment LED’s (3 nos.) for Air temp.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Air Over temperature: Temp > 39.0°C
  • Air Under temperature: Temp < 20.0°C
  • Air Positive band: Temp > Set Temp by 1.5°C
  • Air Negative Band: Temp > Set Temp by 3.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.

NIC653 - Infant Radiant Warmer with Detachable Baby Cradle with Microprocessor based temperature controller with 3 mode Skin / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Lower Shelves
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC642 - Infant Radiant Warmer with Detachable Baby Cradle with Microprocessor based temperature controller with 4 mode Skin / Air / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Air Mode: Room temp. 20.0°C to 39.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• 0.5” Bright 7 segment LED’s (3 nos.) for Air temp.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Air Over temperature: Temp > 39.0°C
  • Air Under temperature: Temp < 20.0°C
  • Air Positive band: Temp > Set Temp by 1.5°C
  • Air Negative Band: Temp > Set Temp by 3.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply

NIC643 - Infant Radiant Warmer with Detachable Baby Cradle with Microprocessor based temperature controller with 3 mode Skin / Manual / Prewarm

• Consists of Ceramic Infra Red Heater 650Watts,
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards

• To Provide accurate assessment of Infant colour and sufficient illumination during procedures

• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow ease of dismantling baby care area during cleaning or fumigation

• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.

• To Prove Highest Degree of Accuracy of maintenance of baby’s body Temperature.

• Thermistor type sensor with Accuracy: ± 0.2°C

• Audio alarm mute facility.
• Mute timing adjustable

• Skin Mode: 30.0°C to 38.0°C
• Manual Mode: Vary Heater Power % from 0% to 100% with increment of 5%
• Time duration (Manual mode): 15 mins (factory default)
• Prewarm mode: Vary Heater Power % from 0% to 25% with increment of 5%
• Time duration (Manual mode): 30 mins (factory default)

• 1” Bright 7 segment LED’s (3 nos.) for Skin temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Set temp.
• 0.5” Bright 7 segment LED’s (3 nos.) for Heater Power%.
• Resolution: 0.1°C

• Control Mode
• Constant Skin temp in ° Fahrenheit.
• Timer: Down Timer / APGAR Timer
• Alarm Messages for
  • Skin Over temperature: Temp > 38.0°C
  • Skin Under temperature: Temp < 34.0°C
  • Skin Positive band: Temp > Set Temp by 1.0°C
  • Skin Negative Band: Temp < Set Temp by 1.0°C
  • Heater Failure: Heater connection is failed/damage/faulty
  • System Failure: Fluctuation of voltage supply.
  • Check Sensor position: No proper voltage supply