NML - 2804 - SHOULDER CUM ELBOW CYCLE

• A versalite exerciser that provides an upper body workout while seated in a comfortable position.The balanced front flywheel provides a smooth, fluid motion. Resistance is user-adjustable. The padded, adjustable removable forehead rest minimizes neck and shoulder strain.
• An electronic readout shows time, pace and pedal counter.

NML - 2805 - AXIAL SHOULDER EXERCISER

• For shoulder & supination-pronation exercises. Used in the same way as a conventional shoulder wheel & wrist machine. A wall mounting unit suitable for small clinics is adjustable in height & radious and fitted with calibrated sensitive resistance mechanism, resistance is controllable from zero to maximum by tightening the strap. A 360 deg. scale is provided on the drum to measure and record the degree of revolution from either direction.
• Adjustment bars are chrome plated. Comes with wall fixing plates.

NML - 2808 - SHOULDER PULLEY SET

• Tubular constructed wall mounting unit, comes with Two Pulleys, Rope and Two Handles.
• Set provides reciprocal, assistive and resistive exercises of the elbow and shoulder. Oven baked finish.

NML - 2809 - SHOULDER PULLEY KIT

• An ideal kit to increase / maintain Shoulder range of motions. The kit consists of One Pulley with Hook Strap, Cord and Two Handles, all packed in a zippered carry bag for convenience.

NML - 2812 - SHOULDER SPRING EXERCISER

• Medium tension steel wire construction with a loop in the centre having hand grips at the ends for both hands.
• Finished bright chrome plated. For elbow and shoulder compression exercises.

NML - 2816 - ARM EXERCISER

• All chrome plated, tubular steel construction, mounted on wooden platform and fitted with painted wall bracket at the top for wall mounting.
• Comes with adjustable swivel pulley block, a set of Ten locking weights and two handles with nylon rope, suitable for all shoulder, elbow & chest exercises.

NML - 2818 - ROWING MACHINE cum SLIDING SEAT

• Tubular steel frame, bright chrome plated finish, size 60"long x 13"wide. Speciffically designed foam padded seat is fitted with FOUR nylon castors and slides smoothly over the frame. Comes with FIVE Springs of different tensions. TWO high tension springs attached to the seat for leg exercises and Three light tension springs are fitted with Two Handles for Rowing exercises.
• Resistance can be varied by removal or adding the springs.

NML - 2824 - WALL BAR

• Tubular steel frame, bright chrome plated finish, size 60"long x 13"wide. Speciffically designed foam padded seat is fitted with FOUR nylon castors and slides smoothly over the frame. Comes with FIVE Springs of different tensions. TWO high tension springs attached to the seat for leg exercises and Three light tension springs are fitted with Two Handles for Rowing exercises.
• Resistance can be varied by removal or adding the springs.

NML - 2831 - NIRMAL HAND EXERCISE TABLE

• Hard-wood table with laminated top, size 24"x 30"x 30" high.
• Fitted with 6 pulleys in a steel frame. Leather loops and nylon cord passing through the pulleys with hanging weight underneath for Fingers Hand, Wrist and Forearm exercises.
• Especially for Metacarpophalangeal & Interphalangeal joints.
• Provided with Supinator/Pronator and Wrist-Circum- duction wheel for Wrist exercises.
• Comes with Five sets of weights, each set consists of 5 weights of One each of 100, 200, 300, 400 and 500 grms.

NML - 2832 - HAND GYMKIT BOARD

• HLaminated exercise board with storage drawer, have several holes to fix Pegs and Springs. Comes with One finger Disc, One Roller, Three Spring loaded Knobes, 3 Aluminium pegs and 3 Sets of Springs of different tensions.
• The unit permits active flexion and extension exercises of the finger and grip.

NML - 2834 - HAND EXERCISER

• Consists of two chrome plated bars, one in a fixed position having two plastic grips and the other one turning around a centre pin having one hand grip and one revolving sleeve. Distance between the bars is adjustable.
• The unit is mainly used for gentle grip strengthening exercises.

NML - 2841 - ROTARY WRIST MACHINE

• Single grip unit of precision machined metal drum with calibrated sensitive resistance control mechanism, is fitted on a height adjustable bar to suit different patients.Resistance can be increased or decreased for Supination and Pronation exercises.
• Range of motion can also be measured and recorded from the scale provided on the drum.

NML - 2842 - WRIST ROLL

• One piece aluminum roll in three different diameters i.e. 30mm, 40mm and 50mm fitted to wall board size: 20cm x 90cm long with adjustable friction control mechanism, controllable from zero to maximum for flexion and extension exercises of wrist and forearm.
• Oven baked finish. Wooden parts finished natural.

NML - 2843 - WRIST CIRCUMDUCTOR

• Cast iron wheel of 30cm diameter with drum stand is mounted on a laminated wooden base size:65cm x 22cm. Has a small adjustable handle fitted to the wheel. Knob is provided on the drum to control resistance from zero to maximum.
• A hollowed foam padded platform size: 22cm x 13cm x 15cm high is fitted with two straps to hold arm and is fitted over the base in front of the wheel for wrist circumduction. Metal parts oven baked finish.

NML - 2850 - GRIP EXERCISER

• Chrome plated finished, metallic grip exerciser is fitted on a 50mm wide laminated base. Suitable for patients with very weak / infirm hand. Gives heavy resistance with Six detachable springs.
• The upper bar is calibrated in centimeters and is provided with a needle to mark & record the daily progress.

NML - 2851 - WEIGHT CUFF SET

• Strengthens weak muscles through load resisting exercises of both upper and lower limbs. Lead shots filled cuff is double sewn and had long wrap around straps to hold weight cuff securely in Place.
• A full set consists of 24 color coded cuffs i.e. two each of 150 gm, 300 gm, 500 gm, 750, 1 kg, 1.25 kg, 1.50 kg, 1.75 kg, 2 kg, 2.5 kg, 3 kg and 4 kg.

NML - 2852 - WEIGHT CUFF SET

• Strengthen weak muscles through load resisting exercises of both upper and lower limbs.
• Lead shots filled cuff is double sewn and has long wrap around straps to hold weight cuff securely, comes in 1/2kg, 1kg, 1.5kg, 2kg, 2.5kg and 3kg weights.

NML - 2855 - DUMBBELLS IRON

• Solid steel dumbbells with chrome plated finish.Set consists of 2 dumbbells of each weight: 1kg, 1.5kg, 2kg, 2.5kg, 3kg, 3.5kg, 4kg, 4.5kg, 5kg, total weight of the set 54kg.
• Comes with a storage cart. Available individually or in set. Full set costs.

NML - 2861 - BALL MEDICINE

• Ball medicine, made out of fine leather, securely stitched with strong leather cord, for Arm and Leg exercises
• comes in different sizes & weights i.e: 1 kg., 2 Kg., 3 kg., 4 Kg., 5 kg.

NML - 2863 - BALL MEDICINE WITH CABINET

• Ball medicine, made out of fine leather, securely stitched with strong leather cord.
• Comes in different weights i.e: 1 kg., 2 Kg., 3 kg., 4 Kg., 5 kg.. Comes with polished teak ply constructed cabinet with double door.

NML - 2869 - SMOOTH EXERCISE BOARD

• Top of 120 cm x 100 cm laminated board with hardwood frame, comes with the facility to adjust the incline on either side.
• Suitable for assistive and resistive exercises of legs and arms. Comes with complete skate

NML - 2870 - SMOOTH EXERCISE TABLE

• Top of 150cm X 85cm laminated board is mounted on rubber tipped tubular legs. Frame finished in oven baked enamel. Height of the top is adjustable from 60cm to 90cm.
• A cutout enables patient to sit close to the table, providing exercises in horizontal plane for shoulder & elbow with a set of 2 skates.

NML - 4202 - THERAPY PUTTY

• Bleedproof non-toxic, clean & non-oily therapy putty leaves no colour or residue on patient's hand and it won't fragment, separate or stick to skin.
• It is designed to meet a wide range of hand / arm strengthening needs. Putty can be squeezed, twisted, stretched or pinched. 5 packs of 450 grams each in five different resistances.

NML - 2859 - EXERCISE PUTTY BOARD

• A laminated slanted board for putty manipulation exercises.

NML - 2813 - SHOUDLER ABDUCTION LADDER

Standard Features:

• Ideal for progressive range of shoulder motion.
• Made of polished teak wood having 30 numbered steps.
• Complete with wall fixing hardware.

• Size: 105cm x 9cm x 8cm.
• Weight: 2 kg 700 grams each.

NML - 2801 - SHOULDER WHEEL

• All 16g tube constructed, 100 cm dia wheel revolve smoothly with C.I drum & is fitted with calibrated sensitive resistance mechanism, the resistance is controllable from zero to maximum. A 360 deg.
• Scale is provided on the drum to measure and record the degree of revolution from either direction. Arc of motion can be varied from 26cm to 86cm dia. Fitted with attachment to raise or lower the wheel at the desired height for each patient.
• Mounted on three laminated hardwood wall boards. Oven baked finish.

Standard Features:

• Size: 43" x 43" x 13".
• Weight: 50 Kg. each.